Model Description

LGJ - 40 - 1 - T - E - 5 - F - R

1      2     3   4   5    6   7    8

1. Model: LGJ

2. Entrance diameter: 40:1-1/2?, 50:2?,65:2-1/2?

3. Horsepower: 0:3/4HP, 1:1HP, 2:2HP, 3:3HP, 5:5HP, 7:7.5HP

4. Pump shaft material: CE-CERAMIC,T-TITANIUM(Ti),S-SSIC

5. O-ring material: V-VITON,N-NBR,E-EPDMz

6. Frequency: 5:50Hz, 6:60Hz

7. Pump body material: P-PVDF,F-FRPP

8. Sliding bearing material: R-RULON,CA-CAREON,S-SSIC,CE-CERAMIC

Product Features

● No shaft seal design, magnetic drive, completely sealed pump body, will not cause chemical leakage.

The pump is injection molded with FRPP and PVDF, suitable for transporting various acidic and alkaline liquids.

The impeller and magnet are integrally formed, which is not easily damaged during high-speed operation and high temperature.

The pump design concept is high reliability, high efficiency, and long lifespan. Breaking through traditional concepts in terms of structure, it has achieved unobstructed sealed full water inlet at high flow rates.

The operating temperature is within 70 ℃.

Suitable for various acid-base liquid circulation, cooling, spray cleaning equipment, continuous electroplating, and some special occasions.