The structure of the submersible pump itself is different from other pumps, so the way and principle of use are also different from other pumps. Today, Little Giant Pump Industry will take you to understand the working principle of the submersible pump.

This type can be used to transport various types of materials on storage tanks, and the open impeller can also be used to transport materials containing particles. Pumps often generate axial forces during operation, and radial forces are supported by rolling bearings and sliding bearings, respectively. However, the temperature of this type of pump cannot be measured during use. The traditional submersible pump uses plastic alloy materials for its housing, main pipe, outlet pipe, and other positions, which are then molded and sintered. During operation, the main part is directly submerged in the liquid, and the shaft seal also does not leak. Moreover, its footprint is relatively small, and its performance is relatively stable and reliable during use. It is also convenient for maintenance and has strong corrosion resistance.

The pump uses a vertical electric motor that is secured to the motor base with bolts, and is directly connected to the pump using an elastic coupling for transmission. It is fixed to the bottom plate position and then the entire pump is installed on the container on the bottom plate. The axial and radial forces of the pump are also borne by each bearing. To ensure normal rotation during operation, it is generally necessary to lubricate the bearings with lubricating oil, and the liquid level should be higher than the centerline of the impeller when conveying the medium.

The above introduction is about the working principle of the Little Giant submersible pump during operation. It occupies a relatively small area during use, so it is very convenient for practical use and maintenance.